Equipment Description:
The automatic rotary tile hanging machine is mainly used for hanging the dried tiles onto the automatic glazing line. The equipment is composed of belt conveyor and tile rotating mechanism. When the tiles are hung and transported by chain conveyor, the photoelectric switch SA0 senses it, inputs the signal to PLC, and PLC outputs the signal Y0 to control the tile rotating motor M1 to rotate 30 degrees, the tiles are in place, and the proximity switch SA1 is sensed to stop the tile rotating motor through PLC After a delay of 1 second, start the belt conveyor m2 to send tiles. When the tiles reach the tile rotating mechanism position, the photoelectric switch SA2 is used to stop M2 through PLC to complete a cycle. In the next cycle, the tiles are hung up and transported away from the electrical chain conveying mechanism, and then completed in turn and again.
Main technical parameters:
Production capacity: 1200piece / h
Power: 1.85kw/set
Dimension (L × w × h): 3155 × 800 × 1100mm
